Geometry and rim
Provide length, width, height and rim drawings if the existing profile needs to change.
Glass shades for lighting manufacturers
A shallow clear oblong glass cover with a continuous raised rim and an open side. Its width is estimated from the photo; confirm the actual width, fixture use and retention method from a drawing or sample before specifying it.
The approximately 100 mm width is a photo-based estimate, not a measured production dimension.




The full length, width, rim profile and seating surface must be compared with the fixture. Send the cover or a dimensioned drawing showing the retained edge and internal clearance.
Ask About Mounting FitProvide length, width, height and rim drawings if the existing profile needs to change.
Use a sample to approve the visible glass quality and edge finish for the selected fixture.
For a 200-piece order, ask about sample availability, cost and timing. Check the cover seat and edge protection in the planned packing after the fixture and retaining structure are defined.
The width is estimated at about 100 mm from the photo. It has not been measured; confirm it on a dimensioned drawing or physical sample.
The listed MOQ is 200 pieces. Send your planned quantity and fixture drawing so we can review the selected specification.
Fit depends on the complete rim profile, clips or retaining method and internal clearance. A photograph alone is insufficient to confirm compatibility.
Share the target length, width, height and edge details. We can review feasibility and tooling before quoting a revised cover.
Send your planned quantity, delivery country and fixture drawing or reference link. Include the overall width and rim/retaining details if available.